Series AK regulator was designed for general use in a wide variety of applications. The series is available in single or two stage models, with low to high flow capacities. Some AK regulator models offer a tied-diaphragm design. Available options include Hastelloy® internals for corrosion resistance, panel installation, and a variety of pressure gauges in psig/bar or MPa units.

• Actuation control pressure isolated from process gas by two seals
• Body material: 316 SS
• High inlet pressure type: Standard Max. 3500 psig (24.1 MPa)
• Flow capacity: Standard to 30 slpm; HF (Option) to 120 slpm
• Ni-Cr-Mo alloy internals available for corrosion resistance
• 100 psig (0.69 MPa) outlet pressure achievable with 80 psig (0.55 MPa) control pressure or less

Series AK regulator was designed for general use in a wide variety of applications. The series is available in single or two stage models, with low to high flow capacities. Some AK regulator models offer a tied-diaphragm design. Available options include Hastelloy® internals for corrosion resistance, panel installation, and a variety of pressure gauges in psig/bar or MPa units.

• Actuation control pressure isolated from process gas by two seals
• Body material: 316 SS
• High inlet pressure type: Standard Max. 3500 psig (24.1 MPa)
• Flow capacity: Standard to 30 slpm
• Ni-Cr-Mo alloy internals available for corrosion resistance
• 100 psig (0.69 MPa) outlet pressure achievable with 80 psig (0.55 MPa) control pressure or less

Series AK regulator was designed for general use in a wide variety of applications. The series is available in single or two stage models, with low to high flow capacities. Some AK regulator models offer a tied-diaphragm design. Available options include Hastelloy® internals for corrosion resistance, panel installation, and a variety of pressure gauges in psig/bar or MPa units.

• Actuation control pressure isolated from process gas by two seals
• Body material: 316 SS
• High inlet pressure type: Standard Max. 2300 psig (15.9 MPa); HR (Option): Max. 3000 psig (20.7 MPa)
• Flow capacity: Standard to 400 slpm
• Ni-Cr-Mo alloy internals
• 100 psig (0.69 MPa) outlet pressure achievable with 80 psig (0.55 MPa) control pressure or less

Series AK regulator was designed for general use in a wide variety of applications. The series is available in single or two stage models, with low to high flow capacities. Some AK regulator models offer a tied-diaphragm design. Available options include Hastelloy® internals for corrosion resistance, panel installation, and a variety of pressure gauges in psig/bar or MPa units.

• Actuation control pressure isolated from process gas by two seals
• Body material: 316 SS
• High inlet pressure type: Standard Max. 1700 psig (11.7 MPa)
• Flow capacity: Standard to 800 slpm; HF (Option) to 1000 slpm
• Ni-Cr-Mo alloy internals available for corrosion resistance
• 100 psig (0.69 MPa) outlet pressure achievable with 80 psig (0.55 MPa) control pressure or less