SMC's MK-Z is a rotary clamp cylinder that has a high allowable moment of inertia. The typical application for the MK-Z is to hold parts during a welding application. A short overall length means that the MK-Z series is versatile in mounting. Auto switches can be mounted on any of the 4 surfaces with no projection of the switch.

Con la combinación del tamaño del cilindro compacto y la capacidad de rotación, el cilindro de la serie MK2 está diseñado para aplicaciones de amarre de gran resistencia, con un brazo integrado disponible que se desplaza hacia fuera cuando el cilindro se extiende. Como opción estándar está disponible el giro de 90º en sentido horario o antihorario y los brazos de amarre con tornillo de fijación. La serie MK2 está disponible en 6 diámetros distintos de 20 mm a 63 mm y carreras de 10 mm a 50 mm.

SMC's CKZ2N power clamp cylinder conforms to the new NAAMS standard. The rounded cover design and release button with minimal protrusion, reduce weld spatter accumulation. The arm opening angle can be easily changed by replacing the stopper bolt.  The CKZ2N is available in sizes equivalent to 50, 63 and 80mm bore with arm opening angles ranging from 15°to 135°.

SMC's European standard power clamp cylinder, series CKZ3T-X2734, was designed with metal switch cassette cover with reconfiguration for simple switch adjustment.  Similar to the CKZ3T, the arm opening angle can be easily changed by replacing the stopper bolt.

The CK1-Z series is a clamp cylinder available in two styles of clevis widths (16.5mm, 19.5mm). It is a non-lube, compact, lightweight cylinder with a built-in speed controller. The CK1-Z is available in 3 bore sizes with stroke lengths up to 150mm. Options include easy speed adjustments, rod attachments and auto-switch capabilities.

The CKZP shot pin cylinder is designed for both high precision and positioning repeatability.  Also known as a locating pin cylinder, the configurations for the CKZP include bore sizes equivalent to 57mm and 71mm with strokes of either 25mm or 50mm.  The proximity switch sensor and port thread type can also be selected.  Widely used in automotive applications, the mounting is based on NAAMS standard (71mm bore)

The WRF100 with its high clamping force makes it suitable for a broad range of applications. Standardized T-type and S-type arms allows the selection to meet certain specifications or applications. Also, has an optional spatter protective cover with easy assembly even after the cylinder is installed.

MACM Centering Unit can help align position heavy work pieces on conveyors.  This results in more compact conveyor lines.